Wet Film Casting Test Line
{tab Overview}
Product Description
Feeding system:
First-stage stirring emulsification, second-stage stirring reactor, third-stage stirring reactor and pumping device.
Extrusion assembly：
Built-in vacuum and cooling station (placed inside the rack);
Threaded element: special alloy, acid and corrosion resistant, vacuum annealing and full hardening treatment HRC62-63: Split cylinder, the base material is imported material, special process treatment, acid and corrosion resistant;
Membrane active rod
Servo motor + magnetic powder clutch drive, drive power 1.0kW;
Main motor overload, overcurrent and other fault alarms, shutdown protection:
The head is equipped with melt pressure and melt temperature display, in which the melt pressure is interlocked with the main motor to realize overpressure fault alarm and shutdown protection:
Melt pump motor overload, overcurrent, melt overpressure and other fault alarms, shutdown protection;
Emergency stop button, safety relay, emergency stop cable;
Safety grounding.
{tab Technical Data}
Product Parameter
| Applicable materials | PE/PVDF |
| Maximum output | 100kg/h (depending on the material) |
| Main drive power | 77kW |
| Maximum screw speed | 600rpm |
| Main screw diameter | φ50. 5mm |
| Aspect ratio L/D | 56 |
| Barrel heating method/quantity | Electric heating/13; Power per zone 2200W |
| Feeder cooling method | Heat transfer oil |
| Barrel cooling method/quantity | Heat transfer oil/14; |
| Heating and cooling method | Electric heating/oil cooling |
| Barrel operating temperature | 350℃ |
| Temperature control accuracy | ±2℃ |
| Temperature control accuracy | ±1℃ |
About Us
{tab Inquiry}
{/tabs
